Burda 06/2016 #101C Maxified Dress

I made this dress using a birdy fabric that I had bought some time ago but was quite precious about it. The challenge was just perfect – it made me brave enough to cut into the birds :-). I had bought the viscose jersey from B&M Fabrics in Leeds.

I wanted a simple pattern with few seam lines to maximise the impact of the birds. Enter Burda 06/2016 #101C dress. Here is the line drawing which shows the simplicity of this pattern.

101-062016-m_large

The dress is meant to be a mini but I maxified it for full impact 🙂 Sewing it up was so fast and took less than an hour to sew up. I opted to sew a neckband for a t-shirt look.

The dress is so comfortable and I love it.

20170523_144106
Burda 06/2016 101C
20170523_144101
Burda 06/2016 101C

I can’t help but feel like lifting off and flying when wearing this dress. Thanks for this challenge Kat and Mel! Now, I need to go finish my Apron challenge make :-).

Thanks for stopping by!

Hila

Advertisements

Burda Shift Dress 09/2015 #108

This is the project that made me realise a skill deficit; I had real problems lining this dress which made me set a 2017 new year resolution: to sew more lined garments.

I was attracted to this dress after seeing this picture.

108a-1509_325x433-id356870-5058dd54f907091320d400bc9dafe303_large
Burda Tank Dress 09/2015 #108 A/B

 

Sewing it was very easy. I cut a size 38 which is my Burda size. It is supposed to have front pockets by the princess seams but I couldn’t imagine using them – the dress is elegant and ruining the princess line with a bulky pocket? No, I wasn’t having it. I could have also added in-seam pockets at the side seam but I completely forgot. You know when you are sewing and everything is going swimmingly and the fabric is a pleasure to deal with – its easy to miss something.

The fabric was bought from Jacks Fabrics in Leeds Market. Unfortunately when I saw it they only had about 1.5 m (£3.80/meter) left which is a shame because I think I would have liked to make long coat out of this. The fabric is viscose wool mix which has a lovely textured hounds tooth pattern.

The shift dress is fitted at the bodice using dior darts (which are my new favourite darts now). It just skims the rest of my body being neither boxy nor tight. I like the boat neckline as well, it lends a Jackie O feel to the dress. I have styled it with a brooch as seen here on IG.

I initially thought that maybe that might make me look too air hostess’y but they do always look stylish so no problem there.

blog20photos20march201720338
Burdastyle 09/2015 #108
blog20photos20march201720344
Burdastyle 09/2015 #108 Collar
blog20photos20march201720348
Burdastyle 09/2015 #108 Detachable collar
blog20photos20march201720358
Burdastyle 09/2015 #108
blog20photos20march201720362
Burdastyle 09/2015 #108
blog20photos20march201720371
Burdastyle 09/2015 #108

blog20photos20march201720400blog20photos20march201720404blog20photos20march201720406

The lining is a bemberg in magenta which just feels luxurious against my skin and so worth the trouble I went to sew it. I ended up hand sewing the lining on to the armholes and neckline ( on the dress form) after several fails at ‘bagging the lining’. Determination and discipline got me through this because I knew if I moved on to the next project I wasn’t going to return to this for a really long time. So I doggedly finished it and its far from perfect. But I will learn to line it properly next time and will report back in autumn when I make another one in a glorious tartan :-).

Verdict – I will definitely be making another one. I like Burda patterns for their cheaper price point and how well they fit me as I had to make no adjustments at all to this. Still lining it was worth it as it fits like a dream and the luxurious feel of a dress gliding past your arms to settle on your shoulders is wonderful.

I’d love to make a colour block version like this MaxMara one here (RRP $650 btw):shift-dresscover_gal

Don’t you just love sewing for the options it gives to recreate very expensive looks?

As always, thanks for stopping by and until next time Happy sewing all!

Peace and love,

Hila

 

 

Self Drafted Drop Shoulder Tee Shirt using Metric Pattern Cutting for Womenswear by Winifred Aldrich

I have been trying to do a bit more pattern drafting. Often I just get carried away with the idea that it is far more convenient to just cut into an already drafted pattern and take it from there. However, I have spent quite a lot of money towards books, classes and tools on pattern drafting so I must make more of an effort.

I decided I wanted to make a drop shoulder tee-shirt which was inspired by this Boden top.7e0f851d2c58ed6e353d22412f7a3c11

As it happens I had an easy fit tee-shirt sloper from when I used Metric Pattern Cutting for Womenswear by Winifred Aldrich.51p5v2bnmt0l-_sr6002c315_piwhitestrip2cbottomleft2c02c35_pistarratingfourandhalf2cbottomleft2c3602c-6_sr6002c315_za11320reviews2c4452c2862c4002c4002carial2c122c42c02c02c5_sclzzzz

I drafted the sloper about 2 years ago so I decided to play around with that.

I started off with the basic tee-shirt sloper and I went on to follow the instructions for dropping the shoulder. The instructions don’t give you any further info regarding the sleeve pattern piece so I used my own logic by gently drawing an opposing curve with roughly the same amount taken off. Eventually, I stumbled upon a great post<link here> which explains in great detail the technicalities of the dropped shoulder.

I decided that at this point it would be a good idea to make a toile as I hadn’t made one yet. I used some jersey fabric that had been in my stash since 2014 – I bought it on EBAY during a late night browsing session (I have since managed to break that bad habit). I think it’s a viscose jersey which is very comfortable to wear. I also quite like the Argyl print :-).

blog20photos20march201720418blog20photos20march201720417blog20photos20march201720414

For the neckband I measured around the neckline once I had finished and deducted 30% of the measurement – added my seam allowances and voila – a neckband that snaps perfectly against my body.

My next step with this draft will be to create the yoke pattern pieces and to drop the shoulder a bit further. The next iteration will be colour blocked to see if the proportions work well.

This was a quick refreshing project as I was not having to think about the instructions or whether I may have missed out something – if I can hang on to that feeling it would help me focus on doing more drafting. Do you prefer drafting your own or find it easier to use patterns?

Thanks or stopping by,

Hila

 

Named Talvikki Sweater

I made this after buying the pattern during the 12 days of Christmas sale. It was a bargain at £5. Here is the line drawing.

talvikki_tech

My thoughts are that it is very quick to sew up and took one sitting to finish. The sleeves are very straight forward and there is no easing involved. The most challenging part for the beginner might be the mitred corners. The sizing was spot on and I didn’t make any alterations at all.

Personally I feel like the side vent is too high for a winter garment given that its supposed to keep me warm and cosy. With my poor circulation I would feel this gap acutely. In winter I wore it layered over thermal sweater underneath. The fabric is a wool jersey that I bought form Fabworks. It washes in the machine and I tumble dry it on low – that seems just fine. I have since washed this about 5 times now with no problems.

I plan on making this again in a cobalt blue wool jersey also from Fabworks but I will lengthen it while shortening the side vent.

The other issue was with my broad shoulder. though the fit is quite good there is some puddling under the collar and I had to do something like swayback adjustment to remove the pooling fabric.

may20201720blog20picture20124
Talvikki Sweater – Vent depth
may20201720blog20picture20120
Talviki Sweater – funnel neck detail
may20201720blog20picture20116
Named Talvikki Sweater – Sleeve
may20201720blog20picture20114
Pooling fabric at front neck base

may20201720blog20picture20106

It simple minimalist chic and quite appealing on gray days. I was a bit ‘meh‘ about it when I finished it but surprisingly found myself pulling it on a lot. Which can only tell me that I like it :-).

I will report back on the ‘neck swayback’ adjustment in autumn when I get round to making the second one. Thanks for stopping by!

Peace and love,

Hila

 

 

Vogue V9112

I actually first made this toile in June 2015 – I know because I have a log of the picture of the muslin.

Vogue V9112 is an asymmetrical seam detail dress design by Marcy Tilton. Loose-fitting, pullover, sleeveless dress has single-layer, pleated, stand-up collar, seam detail, side pockets, bias neck and armhole facings, shaped hemline, and narrow hem. Wrong side shows on collar and hemline.

Here is the cover picture:

v9112_02

….and the line drawing which shows all the lovely intricate seams:

v9112

I was put off this pattern by how much ease it had after making the toile. I cut the size medium based on the pattern size recommendations (this was before  I figured out the lack of finished garment measurements). Needless to say it sat around in the UFO box for a while then I picked it up again determined to fix it as I liked it in principle. However, I was very ruthless in removing ease and ended up with something that barely resembles what the designer intended. I am okay with that though as I made it work for me.

I took it in by a lot on the sides and the back seam. I omitted the pockets as this was a toile. Although now, with hindsight, I should have just added the pockets since its turned into something wearable. Being linen – it if of course lovely to wear. It’s the sort of thing I will throw on when its nice and hot and I want to be unfettered.

I will  be giving the pattern another go definitely – in linen again maybe with some Sashiko embroidery on one of the curved pieces.

 

150718_133103_collage-1
The original size was quite baggy on me.
may20201720blog20picture20098
Vogue V9112 Gathered curved hem
may20201720blog20picture20095
V9112 Collar detail

may20201720blog20picture20088may20201720blog20picture20076may20201720blog20picture20066may20201720blog20picture20058

vogue20v9112
Vogue V9112

The final result is something much more fitted at the bust and loose-fitting everywhere else. I finished the armholes with bias binding. The only thing I need to change now is the colour – I am thinking of dyeing it a deep violet colour.

Verdict – worthy of a second shot at it because despite the fit issues (based on personal preferences only) I still like it. I do need to remember to be careful when cutting it out as it is all cut single layer – I got away with it because I was using a plain solid fabric but with directional fabric I would have messed up.

Thanks for stopping by and until next time, happy sewing!

Peace and love,

Hila

New York Calling : Vogue 1314

Hello chums!

I went to the US during the half term holiday and we had one day of sightseeing with the kids in New York. Here is what I made to wear for said day in New York :-). Its another Vogue 1314 dress in delicious Art Gallery Fabric. For the whole story click on this link here.

Trying to take in the uber sensory experience that is Times Square 🙂

Thanks for stopping by!

Peace and love,

Hila